◆UPG001Ref.SE earphone re-cable 

UPG001Ref.SE is a flagship grade of our earphone cable UPG001 series.
Adopting UPG001 cable developed with the highest priority on sound quality.
High quality OFC-L plug made by Nippon Dicks Co., Ltd. (4.4 mm, 2.5 mm, 3.5 mm) Adopt our custom model.
 In addition, Briseaudio adopted proprietary ultra-high sound quality MMCX (2 pin) connector.(* FitEar model will be FitEar genuine clear connector.)
Brush up has been realized considerably compared with the previous model.
It will be the final version of UPG001Ref.

Photo shows UPG001Ref.SE OFC 3 pole Φ 3.5 mm L-shaped plug - MMCXIt is an example of use of SONY NW-WM1Z and UPG001Ref.SE.BriseAudio special BOX is attached.
 




 

 

 
Octa14Ref. for JH4pin with attenuator 4pole 2.5mm and OFC-Pentaconn(4.4mm)Briseaudio original MMCX & 2 pin connector adopted.Adopt FitEar genuine connector

 
UPG001SE has a high amount of information and freshness, and the range is wider.
Tendency to give a three-dimensional feeling by pyramid balance.
In UPG001Ref.SE, it will be a product that has been tune-up to exceed it much. Mid-low range dynamic feeling, resolution, information volume of music etc. were maximized.
 The Ref. Model is a model that uses Briseaudio's technology as almost of all.

UPG001 cable

The cable developed for portable design adopts high-performance high purity conductors, greatly increasing the amount of conductors and maximizing sound quality by maximizing the merit of the conductor.
 

UPG001 Cable slider adopted for Ref.SE is cut out from rare rosewood solid material with very high texture, and it is producing in Japan.
Even in terms of sound quality and texture as a product, it is finished very high grade.

We were concerned about the material with shape retaining wire for ear hanging. We evaluated selected materials for sound quality. As a result, we have adopted titanium wire with special treatment.
This makes it possible to support both handling around the ears and sound quality.

For prevention of jumping out and for safety measures, a bending process is applied to the tip

Newly developed original high sound quality connector (MMCX, 2 PIN) is adopted

The MMCX (2 pin) connector adopted for UPG001Ref.SE has been developed independently by Briseaudio for the purpose of improving sound quality.
We examined many materials, fully use BriseAudio's know-how, and designed it with cost.It realizes a big sound quality update.
Furthermore, by shielding by wideband nonmagnetic special laminated electromagnetic wave absorbing material (seven layer structure), a strong shielding effect is realized though it is a narrow space.
This aims for not compromised transmission up to the end of the signal.



With FitEar version it will be FitEar genuine clear terminal + titanium wire specification.



 OFC (oxygen free copper) L type plug of all kinds (5 pole 4.4 mm, 4 pole 2.5 mm, 3 pole 3.5 mm, 4 pole 3.5 mm) adopted

 OFC (oxygen free copper) L-shaped plug made by Nippon Dicks Inc adopted by UPG001Ref.SE has sound of huge amount of information. High fresh sound and high purity sound overwhelm the others.Furthermore, it has the convenience of only L shape.
In order to maximize its performance, BriseAudio selectively constructed an 11-layer structure (including 3 layers of wide-band nonmagnetic special laminated electromagnetic wave absorbing material with 7 layers structure) adopted as a flagship cable MURAKUMO selectively in effective locations .
By doing so, we realized overwhelming dynamism. In addition, it prevents decrease of information volume of arrival sound, and realizes reduction of noise floor.
Especially the mid-low range dynamic feeling, resolution, texture reaches the heights that can be said to be overwhelming.

Structure of MURAKUMO (11-layer spiral structure)

【 Product lineup 】

UPG001Ref.SE OFC 5pole Φ4.4mm L-plug-MMCX [MPN:UPG1SEER544LMX]
UPG001Ref.SE OFC 5pole Φ4.4mm L-plug-2PIN [MPN:UPG1SEER544L2P]
UPG001Ref.SE OFC 5pole Φ4.4mm L-plug-FitEar[MPN:UPG1SEER544LFE]
UPG001Ref.SE OFC 4pole Φ2.5mm L-plug-MMCX [MPN:UPG1SEER425LMX]
UPG001Ref.SE OFC 4pole Φ2.5mm L-plug-2PIN [MPN:UPG1SEER425L2P]
UPG001Ref.SE OFC 4pole Φ2.5mm L-plug-FitEar [MPN:UPG1SEER425LFE]
UPG001Ref.SE OFC 4pole Φ3.5mm L-plug-MMCX [MPN:UPG1SEER435LMX]
UPG001Ref.SE OFC 4pole Φ3.5mm L-plug-2PIN [MPN:UPG1SEER435L2P]
UPG001Ref.SE OFC 4pole Φ3.5mm L-plug-FitEar [MPN:UPG1SEER435LFE]
UPG001Ref.SE OFC 3pole Φ3.5mm L-plug-MMCX [MPN:UPG1SEER335LMX]
UPG001Ref.SE OFC 3pole Φ3.5mm L-plug-2PIN [MPN:UPG1SEER335L2P]
UPG001Ref.SE OFC 3pole Φ3.5mm L-plug-FitEar [MPN:UPG1SEER335LFE]
 
Length 1.2m(branch destination 45cm)
 
※The aging period will be in about 200 hours.
 

 *Here is the pin assignment of CIEM 2 PIN
 
 
 *4pole Φ 3.5 mm pin assignment is TRRS (from the top)
    T = L +
    R = R +
    R = L-
    S = R-   
    SONY ZX 2, NW-WM 1 Z / 1A, OPPO  etc.

 Product name UPG001Ref.SE
Conductor High performance high purity copper conductor
Conductor structure Quad Spiral structure
Special 11 layers MURAKUMO construction, special electromagnetic wave shield
* Broadband nonmagnetic special laminated electromagnetic wave absorbing material (7 layer structure) adopted
Insulation Special high functional resin
Terminal Follow each specification

 ※Partial specification change may be made without prior notice for the purpose of improving products etc. Please be patient.